In IXORA V1.1A datasheet on page 26 is probably CTRL+C CTRL+V typo. Capacitive touch connector should not be DF13C-6P-1.25V(51). Is it FH12-10S-0.5SVA(54)?
Dear @marsaf, you are definitely right! that is a copy and paste mistake, we will definitely correct it in the next document revision.
Is there any recommended flat cable type for it?
I think that the best recommendation I can provide here is checking the specification contained on page 3 of this document:
https://www.hirose.com/product/download/?distributor=digikey&type=2d&lang=en&num=FH12-10S-0.5SVA(54)
Normally a standard 0.5mm pitch, same side FFCs available on Digikey should work fine.
In addition, I would like to mention that you will soon able to order the product “Capacitive Touch Display 7” Parallel V1.0A" from our webshop: it gets deliverd with the cable.
I really hope this helps, please don’t hesitate to use again the Toradex community if required.