ApolloX in WSL cannot see connected SoM

Technical Support
, , ,
8

Hi @matheus.tx

this is the return


   IPv4 Address. . . . . . . . . . . : 172.18.0.1
   IPv4 Address. . . . . . . . . . . : 192.168.56.1
   IPv4 Address. . . . . . . . . . . : 10.1.2.50
   IPv4 Address. . . . . . . . . . . : 10.10.10.79
   IPv4 Address. . . . . . . . . . . : 192.168.0.41
   IPv4 Address. . . . . . . . . . . : 192.168.1.41
   IPv4 Address. . . . . . . . . . . : 192.168.3.79
   IPv4 Address. . . . . . . . . . . : 192.168.20.1
   IPv4 Address. . . . . . . . . . . : 192.168.78.122
   IPv4 Address. . . . . . . . . . . : 172.27.208.1

But now I understood a little bit more what happens.
You wrote that you use a base x.x.x.0/24 but my Subnet masks are

   Subnet mask . . . . . . . . . . . . . : 255.255.240.0
   Subnet mask . . . . . . . . . . . . . : 255.255.255.0
   Subnet mask . . . . . . . . . . . . . : 255.255.0.0
   Subnet mask . . . . . . . . . . . . . : 255.255.255.0
   Subnet mask . . . . . . . . . . . . . : 255.255.255.0
   Subnet mask . . . . . . . . . . . . . : 255.255.255.0
   Subnet mask . . . . . . . . . . . . . : 255.255.255.0
   Subnet mask . . . . . . . . . . . . . : 255.255.255.0
   Subnet mask . . . . . . . . . . . . . : 255.255.255.0
   Subnet mask . . . . . . . . . . . . . : 255.255.240.0

And the Verdin is connected to the company LAN (IPv4 10.1.2.50 - mask 255.255.0.0).
I think that this explains what happens.
Not sure how easy is taking into account the proper mask.
Let me know if I can do something.

1 Like