Abount Conflicts using Pinout Designer

Verdin imx8m plus

I am using Pinout Designer for the first time.
I have no “conflicts”, but a large number of “possible”, specially with GPIOs.

Pinout Design User Manual indicates the following: “This signal is currently not selected. If this signal would be selected, a conflict with another signal would occur”

In the case of GPIO-SODIMM-133 and GPIO-SODIMM-155, see attached image, the pins are selected, but no additional conflict information is given.

How should I interpret these “conflicts”?

Thanks,
Oscar

“possible” means that this function can be used bon selected pin but it’s not a standard usage. Conflict may happened if you want same functionality on other module or pin already in use by another function.